Hydro-logic StealthRO200 - Upgrade Kit Bedienungsanleitung PDF herunterladen

Upgrade Kit for Stealth-RO100 to Stealth-RO200

This kit allows you to upgrade your Stealth-RO100 into a 200 gallon per day Reverse Osmosis unit.

Below is the complete kit:

1) Turn the unit so you are looking at the back side. Begin by removing the black automatic shut-

off valve (ASOV) from blue and black tubing on the right side of the membrane housing. The flow

restrictor with a "750" on it is connected to the "ASOV". You will need to remove the short piece

of black tubing and set aside until step #3. The "750" flow restrictor will not be of use anymore

and can be discarded. Keep the purified water tubing (blue) connected to ASOV. Also remove the

white tubing from the carbon filter and cut it in half. Use sharp scissors or a blade to make a clean

straight cut. Snap the 2 mounting clips onto membrane housing. Image below shows unit after

completing above procedures

1 2 3

Seite 1

Upgrade Kit for Stealth-RO100 to Stealth-RO200 This kit allows you to upgrade your Stealth-RO100 into a 200 gallon per day Reverse Osmosis unit. Bel

Seite 2

2) Push the complete membrane upgrade assembly onto the 2 mounting clips. See image below 3) Turn the unit so you are looking at the back side. I

Seite 3

Below is a picture of the complete setup: 4) Flush initial 1 hour of water down the drain. You are now ready to use the system. Consult the inclu

Keine Kommentare

Hydro-logic StealthRO200 - Upgrade Kit Bedienungsanleitung